South Salem, West Salem & Keizer.
Polyaspartic and epoxy floor coatings for Salem and Keizer garages, shops and home gyms. Diamond-ground and moisture-tested, with a lifetime warranty. Free written quotes.
Tell us about your floor — we reply fast.
Salem is our northern anchor. Our crew is based in Albany, about 25 minutes south, we've done plenty of floors up here, and we coat garages, shops and home gyms from South Salem and the Sunnyslope hills to West Salem and Keizer. Like everywhere in the Valley, the floors here see months of rain and wet tires, and every slab gets a moisture test and a diamond grind before we coat it.

In South Salem, Candalaria and the Sunnyslope and Faye Wright areas, many garages are older and show it: oil stains, pitting, hairline cracks, and old paint or DIY epoxy that has started to peel. Those floors get a full diamond grind to remove the old coating and open up the concrete, then crack and spall repair, before the new system goes down.
West Salem and Keizer have a lot of newer homes with bare builder slabs. Those are clean, quick installs, but we moisture-test them too. Newer concrete can still be releasing water, and wet Valley soil keeps pushing vapor up long after the slab has cured.
Salem garages get used for everything: parking, workshops, home gyms, storage. We can run one finish across the whole floor or set up a bay for the gym or shop. Most garages are ground, coated and finished in a day.


One-day polyaspartic & epoxy garage floors that shrug off hot tires, rain, mud and slab moisture — and won't peel like a box-store kit.
Learn more →
Bright, seamless, easy-clean coatings for basements, laundry rooms, gyms and living space — no grout lines, no cold bare concrete.
Learn more →
Fast-cure floors for shops, warehouses, showrooms and garages that go back into service the next day.
Learn more →
High-end metallic, marble-look and custom flake finishes for showrooms, retail, basements and statement garages.
Learn more →Salem gets rain for most of the fall, winter and spring, then hot, dry summers with the occasional triple-digit heat wave. Bare concrete takes a beating from both. Water and grit soak in all winter, and summer heat is when cheap epoxy softens, yellows and starts to peel near the garage door.
When an ice storm hits, the gravel and de-icer on the roads ride home on your tires and sit on the slab. A sealed polyaspartic floor keeps all of that on top, where it hoses off, instead of letting it into the concrete.
The most common reason we see coatings fail in Salem is moisture coming up through the slab. We test for it before we quote and choose the primer to match. That one step is the difference between a floor that lasts and one that blisters in its first winter.
Epoxy is the older chemistry. It's strong and affordable, but it cures slowly and can yellow where sunlight hits it, which in a Salem garage means the strip by the open door every summer.
Polyaspartic cures in hours, stays UV-stable so it won't amber, and handles hot tires better. It also cures at cooler temperatures that stall epoxy, which matters when we're installing in a damp Salem November.
Most of our Salem floors use a polyaspartic system over a diamond-ground, moisture-tested slab. We'll tell you at the quote which system fits your floor and why.
Most Salem garages are done in one day. We diamond-grind the slab, repair cracks and pits, put down the base coat, broadcast the flake, and finish with a clear topcoat.
You can usually walk on the floor that evening and park on it within 24–72 hours, depending on the system and the temperature. Cool, damp weather pushes that toward the longer end, so we'll give you an exact time for your floor.
The garage needs to be completely clear for the day: shelving, freezers and anything sitting on the slab. Most people stage things in the driveway, and it can all go back in after about 24 hours.
A standard 2-car garage runs about $5–$7 per square foot installed. Where your floor lands in that range depends on a few things:
Slab condition: how much crack, pit and spall repair it needs. Old coatings: peeling paint or failed DIY epoxy has to be ground off first. Moisture: a slab that's pushing vapor needs a moisture-mitigating primer. Oil contamination: heavily soaked spots take extra prep. Flake coverage and finish: full-flake, partial-flake or metallic.
We check all of it at the free on-site quote and put the full system and price in writing, so the number doesn't change on install day.
We also coat shops, warehouses, showrooms and service bays around Salem. Commercial floors get fast-cure systems so you're back in service the next day, a slip-resistant finish where the floor gets wet, and scheduling around your hours, including nights and weekends. See our commercial floor coatings →
“I had Joey and his crew come out and do my garage floor. These guys did a fantastic job! Here on time, cleaned up everyday and communicated to me about the process and what to expect. … I highly recommend these guys. … Hard to find quality work or guys that want to work these days! Thank you for a job well done!”
“Responsive professionals with expert installation skills transformed my space into something that is functional and durable and beautiful … They did it fast, they did it right, they did it affordable. These are your guys.”
“Very happy. Great job. Crew totally cleaned up both days. Now I have a beautiful garage. Highly recommend.”
From South Salem to Faye Wright — we serve all of Salem and the surrounding area:
Residential garage and interior coatings don't usually need a permit in Salem or Keizer, so most jobs take one day. For commercial spaces, we'll check whether the floor needs a slip-resistance rating. Free on-site quotes throughout Salem, Keizer and the surrounding area.
Peeling floors come from skipped prep. We mechanically diamond-grind every slab to a clean profile so the coating bonds to the concrete — not to dust, sealer or old paint.
Cheap kits and DIY epoxy lift right off under hot tires. Our polyaspartic and full-flake systems are rated for it — park on it and it stays put.
Standard epoxy ambers and chalks in sunlight. Our polyaspartic topcoats are UV-stable, so the floor by the open garage door matches the floor in the back.
Get a fast, honest written quote for your Salem garage, basement or shop floor today.